Various Settings - Clatronic dvd 797 Bedienungsanleitung

Various Settings

05-DVD 797_GB.indd 51 05-DVD 797_GB.indd 51
Setting a Password
If you want to operate the DVD-Player with a child lock system, you must fi rst
enter a password. This password safeguards the settings for the child lock
system, so that it can only be changed by yourself.
In this menu you can change the password for the child lock system.
In order to change the password, you must fi rst enter the current password. The
master password is „8888".
HINWEIS:
If you forgot your password, you can deactivate the child lock system with this
Master password.
Proceed as follows to change the password:
1. In the „Set Password" line press the ENTER key (Fig. 3/13). A window
appears for entering the current password.
2. Enter the current password in the "Enter Password" line with the Numeric
buttons (Fig. 3/3) on the remote control.
In order to prevent unauthorised individuals from reading the password, only
the symbols „ **** " are shown on the screen. Confi rm your entry with the
ENTER key (Fig. 3/13).
3. In order to set the new password, press the ENTER key in the "Set Password"
line.
4. Enter the new password in the "New Password" line with the Numeric but-
tons on the remote control.
5. Confi rm the new password by entering it again and then pressing the ENTER
button. This is then briefl y confi rmed by the words "Set Password Successful"
on the screen.
Using Default Settings
Select the command „Use Default Settings/Yes" if you would like to return the
device to the factory presets.
All settings that you have made are lost.
Screen saver
The player is able to display a still image for any time on the screen. This can
cause damage to the screen. It is therefore recommended to activate the screen
saver.
The following options are available:
On: The screen saver is activated (default setting).
Off: The screen saver is deactivated.
Changing the default settings Themen
18.08.2008 15:58:28 Uhr 18.08.2008 15:58:28 Uhr
51