Connecting The Audio Cable - Clatronic dvd 709 Bedienungsanleitung

Layout Clatronic.book Seite 59 Donnerstag, 9. Februar 2006 9:41 09
Connecting the Audio
cable
Fig. 8
Fig. 9
Fig. 10
You can choose from three transmission methods for audio signals.
You must generally choose first whether you would like to have the
sound coming from your TV, or through a Stereo or 5.1-Amplifier.
The Audio cable must then be connected to the TV or an amplifier
accordingly.
NOTE:
If your amplifier is equipped with a digital output, you should use
the amplifier. You will experience a much better audio quality, and
the installation is much easier.
Stereo
Connect both Audio cables for the right (Fig. 8/1) and the left
(Fig. 8/2) speakers to your replay device or your amplifier.
1. Plug the Audio jacks into the sockets on the back of the player.
2. Plug the Audio jacks into the corresponding sockets on your
replay device or your amplifier.
5.1-Audio signal
If you would like to achieve a replay of almost original quality you
should use an Audio output by means of a 5.1-Audio signal.
This method uses 6 speakers. Four of these speakers are placed in
the four corners of the room. One speaker is positioned close to the
replay device. The sixth speaker serves the output of very low tones.
With this arrangement of speakers a very natural stereophonic
sound is achieved.
If your amplifier has no digital input you need six cables to transmit
the analogue 5.1-Audio signal.
Proceed as follows:
1. Plug the Audio jacks into the sockets on the back of the player.
Make sure that the jacks are correctly arranged:
- (1) Connection for Subwoofer: Bass
- (2) Connection for Center speaker
- (3) Speaker rear right
- (4) Speaker rear left
- (5) Speaker front right
- (6) Speaker front left
2. Plug the Audio jacks into the corresponding sockets on your
replay device or your amplifier.
Digital
Connect the Coaxial cable for transmission of digital Audio signals
to your replay device or your amplifier.
1. Plug the Audio jack into the socket on the back of the player.
2. Plug the Audio jack into the corresponding socket on your replay
device or your amplifier.
Starting up
59