Herunterladen Inhalt Inhalt Diese Seite drucken

Clatronic dvd 797 Bedienungsanleitung Seite 49

Dvd-player
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

05-DVD 797_GB.indd 49
05-DVD 797_GB.indd 49
16:9: Select this option if you use a wide screen TV for replay. Please note
that fi lms, that have been recorded with TV-aspect 4:3 can still be replayed
using aspect 4:3. This means, that replaying this fi lm will not require the
complete wide screen area of the television.
View Mode
Here you can set various display options for the playback device that is con-
nected.
NOTE:
The setting „Panscan" is not supported by all DVDs.
TV-System
Match the output of the DVD-Player to the colour transfer system of your replay
device. The following options are available:
NTSC: A system primarily used in North America.
PAL: A system commonly used in Europe.
AUTO: Select this setting if your replay device is a multi-system unit.
Video Output
Select the video output option for the playback device that is connected and which
you wish to use. Choosing the right signal format depends on the type of connec-
tion and the playback device (see also the operating manual of the replay unit).
S-VIDEO: Choose this option if your replay device supports progressive
signals and is connected to the DVD-Player by means of an S-Video cable.
Component: Choose this option if your replay device supports progressive
signals and is connected to the DVD-Player by means of a Component-Video
cable.
RGB: Select this option if your playback device is connected to the DVD
player via the SCART connection.
P-Scan: Choose this option if your playback device supports progressive
signals and is connected to the DVD-Player by means of a Component-Video
cable.
NOTE:
If you would like to select the „RGB" setting, please ensure that your play-
back device supports this setting.
If the „S-VIDEO" or „P-Scan" option is activated but your playback device
does not support Progressive Scan signals, no picture is displayed.
By pressing the VIDEO button (Fig. 3/1) you can also switch between the
video output options. (Only in Stop Mode possible.)
Changing the default settings
Themen
18.08.2008 15:58:26 Uhr
18.08.2008 15:58:26 Uhr
49

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis