Troubleshooting - Panasonic ER-GB96 Bedienungsanleitung

Removing the blade
Hold the main body with the switch
facing upward and push the blade with
your thumb while catching the blade in
your other hand.
Remounting the blade
Fit the mounting hook ( B ) into the blade mounting ( A ) on the
appliance and then push in until you hear a click.
16
ER-GB96_86.indb 16

Troubleshooting

Problem
Until problems are solved, please
follow each procedure as follows:
1. Charge the appliance.
(See page 10.)
2. Clean the blade and apply oil.
(See pages 14 and 15.)
3. Replace the blade.
The appliance has
(See this page.)
become blunt.
4. Have the battery replaced by an
authorized service centre.
The operating time is
short.
Charge the battery for
approximately 8 hours
The appliance stopped
continuously to rejuvenate it.
working.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
centre for repair.
Insert the appliance plug into the
main body firmly and make sure
the charge status lamp glows.
The appliance cannot
be charged.
Charge within the recommended
charging temperature of 0 °C to
35 °C.
Action
17/12/13 下午2:31