Herunterladen Inhalt Inhalt Diese Seite drucken

How To Use - Panasonic ER-GB96 Bedienungsanleitung

Netz-/akku-bartschneider
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
• Recommended ambient temperature for charging is 0 –
35 °C. Battery performance may decrease or charging
time changes under extremely low or high temperatures.
• A full charge supplies enough power for approximately
50 minutes of use. (Based on dry using at 20 - 30 °C.)
The operating time may differ depending on the
frequency of use.
• When charging the appliance for the first time or when
it has not been in use for more than 6 months, the
charging time may change or the charge status lamp
may not glow for a few minutes or the operating time
may shorten. Please charge it for more than 8 hours in
such cases.
AC operation
If you connect the AC adaptor to the appliance in the same
way as for charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move
slowly or stop, even with the AC operation. In this case,
charge the battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.
How to use
Turn the appliance off.
Apply the oil to the blade before and after each use.
(See page 15.)
Do not use with shaving foam applied or when the beard is wet.
A wet beard may stick to the skin or bunch up, making it
difficult to trim.
Before trimming, comb your moustache with a comb.
The appliance may not operate in an ambient temperature
lower than approximately 0 °C.
ER-GB96_86.indb 11
1
Mount the desired attachment and adjust the
trimming height as needed. (See page 12.)
• It can also be used without the attachment.
(Trimming height: approx. 0.5 mm)
2
Press the power switch to turn
on the power.
Removing and mounting the attachments
Take care not to injure hands, etc., with the blade when
removing or mounting the attachment.
►Mounting the attachment
Mount the attachment to the
main body until it clicks.
If the attachment is not
attached correctly, it may shift
and end up cutting too much
during use.
►Removing the attachment
Hold the main body securely and
remove the attachment from the
main body.
click
11
17/12/13 下午2:31

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Er-gb86

Inhaltsverzeichnis