Dmx Operation - EuroLite LED IP T-PIX 12 HCL Bedienungsanleitung

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 77 control channels.
However, it can also be switched to a mode with 6, 11, 24 or 41 channels if different functions are required.
Tobe able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller's documentation.
1 Press the MENU button so many times until MODE is indicated in the display. Confirm with the ENTER
button.
2 The display indicates 6 CH (6 DMX channels), 11 CH (11 DMX channels), 24 CH (24 DMX channels), 41
CH (41 DMX channels) or 77 CH (77 DMX channels). Use the buttons UP and DOWN to select the
desired number of DMX channels. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address ADDRESS:***. Use the buttons UP
and DOWN to set the address. Confirm with the ENTER button.
4 If no DMX control signals are available, the display will flash.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
Mode/
Channel
6 CH 11 CH
1
0
2
0
11
1 3
0
2 4
0
3 5
0
4 6
0
5 7
0
6 8
0
0
31
36
9
41
46
51
56
Value Feature
Dimmer intensity
Gradual adjustment of the dimmer intensity from 0 to 100 %
255
Strobe
No function
10
Strobe-effect with increasing speed
255
Red
255 Red 0 - 100 % increasing
Green
255 Green 0 - 100 % increasing
Blue
255 Blue 0 - 100 % increasing
White
255 White 0 - 100 % increasing
Amber
255 Amber 0 - 100 % increasing
UV
255 UV 0 - 100 % increasing
Color presets
30 No function
35 Color 1
40 Color 2
45 Color 3
50 Color 4
55 Color 5
60 Color 6
27/36 00126414, Version 1.0