Hdmi Cec Function; Hdmi Arc Function - Metz Cosmo 32TZ37 Bedienungsanleitung

Functional overview
TV PVR Archive Radio
Videos Photos Music
HDMI USB Analogue
Manual Remove USB Device Filemanager
Menu
Autom. On/Off Parental control
OK
OK
AV devices
O
PERATION LEVEL
■ SIMPLE ■ COMFORT
HDMI socket EURO-Buchsen HDMI 1
EURO socket HDMI 2
HDMI 3
CEC-settings
CEC settings
BACK
OK

23.3 HDMI CEC function

With Consumer Electronics Control (CEC), you can use the Metz remote control to operate
20:10 the basic functions of any connected AV devices. To enable CEC, the AV device must support
■ MANUAL
the HDMI CEC functions and be connected to the TV set over an HDMI cable. The general
Portal
purpose of the CEC function is to simplify cabling while providing integrated control.
Network
CEC settings
• Press
• Select "Menu" with the cursor and press the
• Select "AV devices" with the cursor and press the
• Select "HDMI socket" with the cursor in the context menu and press the
• Use the cursor to select "CEC-settings" and press the
• Use the cursor to select "HDMI CEC" and press the
• Use the cursor to select "on" and press the
• Press the

23.4 HDMI ARC function

H H H
Once the CEC function has been switched on, an audio return channel (= ARC) can be
■ EXPERT ■ MANUAL
HDMI CEC Ein
HDMI CEC Ein
activated or deactivated on the HDMI cable. If "HDMI ARC on" has been selected, the audio
HDMI ARC Ais off
return channel will be activated automatically when the TV set is switched on, if a CEC
CEC Amplifier without ARC offf
and ARC-capable AV receiver / HiFi amplifier has been connected to the HDMI-socket
"IN1 (ARC)". This will then reproduce the sound of the TV set.
+
The "ARC Function" is only available for AV devices that are directly connected to the
TV set.
EXIT
button to open the "Functional overview".
EXIT
button to exit the menu.
82
button.
button.
button.
button.
button.
button.