Selecting The Sound Output - Metz Cosmo 32TZ37 Bedienungsanleitung

Sound
O
PERATION LEVEL
■ SIMPLE ■ COMFORT
Sound settings, general Sound settings, general Speakers
Sound set., prog. posn. Headphone
Analogue output Analogue output
Digital output
Tone settings
Automatic volume control on
Ton adaption 1) MetzSound
Mute Immediately
BACK
Preset value Channel 1
OK
Sound
O
PERATION LEVEL
■ SIMPLE ■ COMFORT
Sound settings, general Speakers Speakers
Sound settings, general
Sound set., prog. posn. Headphone
Analogue output
Digital output
Tone settings
Automatic volume control on
Ton adaption 1) MetzSound
Mute Immediately
BACK
Preset value Channel 1

17.6.1 Selecting the sound output

H H H
The following settings for sound output are pos:
■ EXPERT ■ MANUAL
a) "constant" mode and loudspeaker "on"
Modus variable
Output level constant
The volume level on the "AUDIO OUT port" on the back of the TV remains set to "constant"
Headphone
in the %-value in the menu.
Sound output also occurs via the speakers of the TV set.
The volume of the TV set speakers can be changed with the V+/V– key of the remote
control.
b) "constant" mode and loudspeaker "off"
The volume level on the "AUDIO OUT port" on the back of the TV remains set to "constant"
in the %-value in the menu.
There is no sound output via the speakers of the TV set.
H H H The symbol for the mute setting does not appear on the screen.
■ EXPERT ■ MANUAL
The volume cannot be changed with the V+/V– key of the remote control.
Volume 60%
Equalizer 0
c) "variable" mode and loudspeaker "on"
Balance 0
The volume level on the "AUDIO OUT port" on the back of the TV can be adjusted.
Sound output also occurs via the speakers of the TV set.
The volume of the TV set loudspeakers and the volume level on the "AUDIO OUT port" can
be changed with the V+/V– buttons on the remote control
d) "variable" mode and loudspeaker "off"
The volume level on the "AUDIO OUT port" on the back of the TV can be adjusted.
There is no sound output via the speakers of the TV set.
The symbol for the mute setting does not appear on the screen.
The volume on the "AUDIO OUT port" can be changed with the V+/V– buttons on the
remote control.
67