Collecting Epg Data - Metz Cosmo 32TZ37 Bedienungsanleitung

24.1 Collecting EPG data

EPG data is broadcast by each channel for its program contents. Information will therefore
vary accordingly. Switch your TV to stand-by mode so that EPG data can be compiled or
alternatively updated.
The orange or blue-red LEDs will be illuminated when EPG data is being compiled.
+
After switching on the TV set or if a recording timer has been programmed, the collec-
tion of data is interrupted until a switch back occurs to stand-by mode or the recording
timer is terminated.
Please note
The unit's TV station list shows all known channels and provides information on them in the
programme guide, unless you have made a different selection in the favourite station list
(see next page).
New TV stations are not automatically added to the EPG station list after another
station search. You will have to do this manually.
The collection process will be halted or stopped if:
• the TV set is switched off using the power switch.
• a recording is programmed in the "Recordings/EPG" menu.
• a "timer recording" is running or will begin in an hour.
If the TV set is switched to stand-by mode while processing data, the light diode illuminates
orange or blue-red to indicate that data is still being processed.
+
Do not switch the TV set off during the collection process. Give it a chance to collect all
EPG data at least one time.
85