Metz Cosmo 32TZ37 Bedienungsanleitung Seite 394

Problem
No channel reception.
Channel or frequency change by
the broadcasters.
One channel displays picture faults
(stripes or formation of tiny blocks)
Possible cause
• The reception data of a channel have been
changed by the channel provider.
• The signal quality is poor.
• Find out more e.g. at
"www.lyngsat.de" for DVB-S
"www.ueberall-tv.de" for DVB-T
e.g. "www.kabeldeutschland.de" for DBV-C
on the changed data of the channel.
Carry out a manual channel search with the new
reception data of the channel, on this see
Ch.9.3.2, 9.4.1 and 9.6.1.
The channels found will be added to the end of
the station table
•Automatic channel search searches the entire
reception area and adds all (in the case of DVB-S
several hundred) channels found to the end of
the station table.
• Reception, especially for DVB-S, is disrupted by
a bad weather front at the reception location or
at the broadcasting station. This can also occur
with the Cable which is supplied via DVB-S to
the cable network.
127
Remedy