Setting The Sat System, Antenna System - Metz Cosmo 32TZ37 Bedienungsanleitung

Functional overview
TV PVR Archive Radio
Videos Photos Music
HDMI USB Analogue
Manual Remove USB Device Filemanager
Menu
Autom. On/Off Parental control
OK
OK
Satellite
O
PERATION LEVEL
■ SIMPLE ■ COMFORT
DVB-S DVB-T Aerial facility Aerial facility
Astra 19,2°
Hot Bird 13°
Automatic search
Manual search
General settings
BACK
OK

9.5 Setting the SAT system, antenna system

The TV set must be configured for the SAT antenna system in the "DVB-S" menu.
Please ensure that the antenna connection is correct (Chap. 4.1)
20:10
■ MANUAL
Antenna system
Portal
Normal
Medie Player
Network For a standard satellite system with an antenna line.
Single arial (single cable distribution SDC)
With the "Single cable" setting, the DVB-S receivers have one feed line. The channel
selection is preset according to the structural conditions of the satellite system.
No antenna control signals can be sent over the feed line.
Unicable/JESS
The antenna system with a channel router feeds one cable and is designed to receive the full
channel selection. For this purpose, each receiver is assigned one specific frequency in the
satellite frequency range (950-2150 MHz). The channel router has multiple fixed frequencies
(SCR-Freq.) saved in a frequency bank, the SCR number and the SCR frequency must match;
see the instruction manual for the channel router.
H H H
■ EXPERT ■ MANUAL
Antenna Antenna normal normal
normal
Power compensation Aus Single aerial
LNB supply voltage Unicable Ein
DiSEqC System JESS Off
EXIT
24