Technical Data; In- And Output Signals Supported - Metz Cosmo 32TZ37 Bedienungsanleitung

36 Technical data

Mains voltage: . . . . . .230 -240 V ˜ 50 Hz
Antenna input: . . . . . 75 Ohm
Channel coverage: . . DVB-T, DVB-C, analogue 48-862MHz
DVB-S/S2
Operating temperature range: +5°C bis +35°C bei 75 % air humidity
Energy consumption values see separate data sheet

In- and output signals supported

1920x1080p 60 Hz
1920x1080i 60 Hz
1920x1080p 30 Hz
1920x1080p 24 Hz
1280x720p 60 Hz
720x576p 50 Hz
720x480p 60 Hz
720(1440)x576i 60 Hz
720(1440)x480i 60 Hz
640x480p 60 Hz
1360x768p 60 Hz
1280x1024p 60 Hz
1280x768p 60 Hz
1024x768p 60 Hz
800x600p 60 Hz
The common 3D formats (frame packing, side by side, top and
bottom) are supported.
HDMI Audio: Linear PCM Stereo 32kHz/ 44.1kHz/ 48kHz
950-2150MHz
HDMI 1, HDMI 2, HDMI 3
1920x1080p 50 Hz
1920x1080i 50 Hz
1920x1080p 25 Hz
1280x720p 50 Hz
720(1440)x576i 50 Hz
MINISCART
RGB IN: 576i 50Hz, 480i 60Hz
Y/C IN: PAL 576i 50Hz, NTSC 480i 60Hz
FBAS (CVBS) IN: PAL 576i 50Hz, NTSC 480i 60Hz, SECAM 576i
50Hz, PAL 60
Audio IN: Analog Stereo (Line-IN)
Audio OUT: Analog Stereo (Line-OUT)
DIGITAL AUDIO OUT
SPDIF (Linear PCM Stereo or
Dolby Digital, depending on source)
AUDIO OUT
Analogue Stereo (Line-OUT)
Haedphone OUT
: Headphone impedance ≥ 32 Ohm
124