Activating Your Tv For Usb Recording - Metz Cosmo 32TZ37 Bedienungsanleitung

• Do not transport the TV set while it is switched on and also not
directly after switching it off.
• The hard-disk recorder must be shut down before switching off the
LCD TV set. Press the green key
and wait until "Please wait" disappears from the display. Now the
LCD TV set can be switched off with the power button on the TV set.
Notes regarding external hard disks
To be able to connect an external hard disk to devices that do not have a
built-in hard disk, you must first enable the recording function (see
28.2).
Connect the external hard disk to the TV set via USB socket. Before
an external hard disk can be used, it must be formatted as described
in Chapter 26.2.
for this on the remote control

28.2 Activating your TV for USB recording

+
This is only necessary for TV sets with an external hard-disk
recorder.
You can connect an external hard drive to your TV set and use it to record
programmes and for the time shift function.
We call it "USB recording". You can set up this extremely useful function
very easily yourself. All you have to do is visit the Metz homepage, note
down the release code and enter it in your set. This service is free of
charge and does not require registration. Your specialist dealer will be
happy to do it for you if you have no Internet access.
Your Metz TV set has a specific 20-digit "request key". Using this code you
can request the 7-digit "activation key" from the Metz homepage at
www.metz-ce.de.
102