Notes On Safety; Symbols And Icons; Symbols On The Battery - Parkside PMSA 12 A1 Originalbetriebsanleitung

GB IE NI
The vibration values represent maximum
values which have been determined with the
supplied blade. The actual vibration values
may vary depending on the used acces-
sories.
The vibration values are still affected by the
handling for the user's.
Levels of noise and vibration were deter-
mined according to the norms and regula-
tions in the declaration of conformity.
The vibration emission value has been
measured according to a standardised test-
ing method and may be used for compari-
son with another electric tool.
The indicated vibration emission value may
also be used for an introductory assessment
of the exposure.
Warning:
The vibration emission value whilst
actually using the electrical tool may
vary from the given values indepen-
dently of the type and way in which
the electric tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).
6
CY

Notes on safety

Caution! When using
power tools, observe the
following basic safety
measures for the prevention
of electric shocks and the
risk of injury and fire.
Please read all these instruc-
tions before using this elec-
tric tool and please keep
the safety instructions.

Symbols and icons

Symbols on the device:
Warning!
Read the manual!
Electrical machines do
not belong with domestic
waste.

Symbols on the battery:

Read the manual!
Do not subject the battery
to strong sunlight over long
periods and do not leave it
on a heater (max. 45 °C).
Store the battery in
charged condition.
Do not dispose
of batteries in
household
waste, fire or
water.