Parkside PMSA 12 A1 Originalbetriebsanleitung Seite 11

medical assistance. Leaking
battery fluid may cause skin
irritations or burns.
e) Do not use damaged or
altered batteries. Dam-
aged or altered batteries
can be unpredictable and
lead to fire, explosion or risk
of injury.
f) Do not expose batteries
to fire or elevated tem-
peratures. Fire or tempera-
tures over 130oC can cause
an explosion.
g) Follow all instructions
for charging and never
charge the battery or
the battery-powered
tool outside the tem-
perature range stated
in the operating instruc-
tions. Incorrect charging
or charging outside the
permitted temperature range
may destroy the battery and
increase the risk of fire.
6) Service
a) Have your power tool
serviced by a qualified
repair person using
only identical replace-
ment parts. This will en-
sure that the safety of the
power tool is maintained.
b) Never repair damaged
batteries. All battery
repairs should be carried
out by the manufacturer or
authorised customer service
centres only.
GB
7) Special safety directions
for battery-operated
tools
a) Ensure that the device
is switched off before
inserting the battery.
Inserting a battery into a
power tool that is switched
on may result in accidents.
b) Recharge the batteries
indoors only because
the battery charger is
designed for indoor use
only.
c) To reduce the electric
shock hazard, unplug
the battery charger
from the mains before
cleaning the charger.
d) Do not subject the bat-
tery to strong sunlight
over long periods and
do not leave it on a
heater. Heat damages the
battery and there is a risk of
explosion.
e) Allow a hot battery to
cool before charging.
f) Do not open up the bat-
tery and avoid mechani-
cal damage to the bat-
tery. Risk of short circuit and
fumes may be emitted that
irritate the respiratory tract. En-
sure fresh air and seek medi-
cal assistance in the event of
discomfort.
g) Do not use non-re-
chargeable batteries!
IE NI CY
11