Installation Instructions - Merrychef Mealstream serie Handbuch

INSTALLATION
Remove packing material and protective film from the oven.
Check for obvious signs of transit damage. If necessary, inform the
supplier IMMEDIATELY.
LOCATION AND POSITIONING
Choose a site away from major heat sources.
DO NOT position so that hot air is drawn in from fryers, grills, griddles,
etc.
A heat barrier to the height of the oven must be installed if sited next to
a hob, stove or range.
Place the oven on a flat surface that is LEVEL, STRONG and STABLE.
Allow a minimum clearance of 50mm to the rear, top and each side to
allow air to circulate freely.
The air intake is located under each side of the oven, even with the
clearance specified above it is important that airflow is as cool as
possible and not pre heated by other appliances such as fryers, grills or
griddles.
Allow a minimum of 50mm clearance above the oven for hot air to
escape.
Allow sufficient clearance, 400mm in front of the oven for the door to
open fully
Do not affix labels/stickers to oven other than those applied by the
manufacturer
Note the
minimum
recommended
clearance
required for
air flow
5
Note:
The air intake is located
under each side of the oven,
even with the clearance
specified below it is
important that airflow is as
cool as possible and not
pre-heated by other
appliances such as fryers,
grills and griddles as this
will deteriorate the life and
performance of the oven.
Do not stack the oven
directly on top of another.
Use a separate shelf or
double tiered stand.
WARNING:
Check that the
AIR FILTERS are in place
prior to operation
( see Main Features )