Ip Board Configuration; Minimum System Requirements (Version With Ip Board Only); Configuration Procedure - Videotec ULISSE PLUS Bedienungslanleitung

9.7 IP Board Configuration

9.7.1 Minimum system requirements
(version with IP Board only)
Choose one of the following configurations,
according to the number of channels to be controlled
CHANNELS CPU
16 Intel Core 2
Duo 2.4 GHz
32 Intel Core
2 Duo 2.66
GHz
49 Intel Core 2
Quad 2.66
GHz
64 Intel Core 2
Quad 2.66
GHz
Tab. 12

9.7.2 Configuration procedure

Once the pan & tilt has been preset and configured
("7.2.5 Connecting the Ethernet cable (for IP board
version only)", page 20) start configuring the IP
parameters of the pan & tilt.
The IP address of the various units should be
configured using a PC with a Microsoft Windows Xp®
service pack 2 or Microsoft Windows Vista® (Business
Edition or Enterprise Edition) OS and Microsoft
Internet Explorer® software.
Set the IP address of the PC as 192.168.0.1 (or
192.168.0.2 etc.).
To configure the unit, connect it physically to the
LAN, power it and run the browser Microsoft Internet
Explorer® version 6.0 or above.
To set the IP address of the various units,
j
power them, taking care to connect them
one at a time to the LAN (switch/hub).
Configure the unit and insert the settings
for at least the IP address and host name.
When the unit has all the desired settings,
connect the ethernet cable and go on to
configure the next unit.
MEM HDD
1GB 250GB
2GB 250GB
4GB 250GB
4GB 250GB
Enter address 192.168.0.100. you will have to log in
with a password.
The default account name is: Admin
(with a capital A).
The default password is: 123456
When making the settings for the first time, insert the
default account name and password.
Fig. 83
When installing for the first time, it will be necessary
to install OCX control in order to have a correct video
display and then confirm the settings in the following
pop-up menu.
Fig. 84
When you have pressed OK/Enter in the pop-up
menu, the following window will appear.
Fig. 85
37