Conformity Statement - Intewa PROFI SC 9-90 Installation Und Betriebsanleitung

3.4 Conformity statement

Electro-magnetic compatibility 2014/30/UG
This is to certify that the following unit – due to its design and type of construction –
meets the relevant basic requirements of the EC Directive.
Product designation:
Type designation:
Applied harmonized norms: EN ISO 12100 -1 / -2; EN 55014-1; EN 55014-2; EN 60204-1
Applied national norms:
The following operating conditions and environments of use shall be required.
The unit has been designed to control/regulate and operate a rainwater harvesting system.
The unit shall be installed in a dry room protected from frost. Operation in an industrial
environment, open-air installation and installation in wet cubicles shall not be allowed. The
operating manual and the installation manual shall be observed and followed.
07.01.2019
Date / manufacturer signature
INTEWA GmbH
Auf der Hüls 182
D 52068 Aachen
Tel.: 0049-241-96605-0
Fax: 0049-241-96605-10
Email: info@intewa.de
Internet: www.intewa.de
EC Conformity Statement
In the sense of EC Directive
Low-voltage Directive 2014/35/UG
Machine Directive 2006/42/EG
System control PROFI SC
9-90; 14-90; 25-60; 25-80
DIN 1988-100; BS EN 1717
Page Seite 39