Tylo SENSE PLUS Installationsanleitung Seite 19

8. Use the drill template to mark where the heater is to be posi-
tioned (see Figure 9, Page 5). (This step is not required
if the heater is to stand on the floor. See separate instructions
for heater feet (option).)
Figure 9: Drill template
1. 298 mm
2. 308 mm
3. 290 mm
4. 48 mm
9. Attach the four brackets to the wall according to the tem-
plate marks. Mount the two lower brackets with their screw
holes downwards, so that they are hidden. Only the two upper
brackets need locking with lock screws (see Figure 10, Page
5).
Figure 10: Bracket and screws
1
2
4
3
10. Mount the sensor on the wall see Figure 11, Page 5.
Tighten the screws carefully to avoid breaking the circuit
board.
Figure 11: Mounting the sensor
11. Install the herb bowl/air humidifier (see Figure 12, Page
5).
Figure 12: Installing the fragrance holder/air humidifier
5