Features; Package Contents; Technical Specifications; General Safety Instructions - Parkside PDTS 6.3 B3 Originalbetriebsanleitung

Features

Switch-on guard
Trigger
Blade guard
Tensioning screw
Clamping flange
Cutting disc
Hex key
Spindle
Open-ended spanner
Connector nipple 1/4"

Package contents

1 air cut off tool
1 cutting disc Ø 75 mm (pre-fitted)
1 open-ended spanner
1 hex key
1 connector nipple (1/4") (pre-fitted)
1 set of operating instructions
Technical specifications
Rated speed
Rated air pressure
Disc size
Spindle dimension
Connector nipple
Weight:
Noise emission values:
Noise measurement determined in accordance
with ISO 15744:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Vibration emission value:
Vibration values determined in accordance with
ISO 28927-4 and EN 12096:
a = 3.06 m/s 2
h
Uncertainty K = 0.53 m/s
PDTS 6.3 B3
20300 rpm
max. 6.3 bar
Ø 75 x 1 x 10 mm
M6
1/4"
approx. 0.69 kg
L = 93.6 dB(A)
pA
K = 3 dB(A)
pA
L = 104.6 dB(A)
WA
K = 3 dB(A)
WA
2
WARNING! General safety
instructions
WARNING!
► For multiple hazards: Please ensure that you
have read and understood the safety instruc-
tions before adjusting, operating, repairing,
maintaining or replacement of accessories
on the grinding machine for die grinders
as well as before working in the vicinity of
the machine. Failure to do this can result in
serious bodily injury.
■ The abrasive grinding machine should only be
set up, adjusted or used by suitably qualified
and trained operators.
■ This machine must not be modified. Modifi-
cations can reduce the effectiveness of the
safety measures and increase the risks for the
operator.
■ Do not lose the safety instructions – hand
them over to the operator.
■ Never use a damaged abrasive grinding
machine..
■ The machines must be inspected regularly to
ensure that the compressed air abrasive cutter
is marked with the clearly legible ratings and
markings required in this part of ISO 11148.
The employer/user must contact the manufactur-
er to obtain replacement signs if necessary.
Hazards caused by flying parts
■ If a workpiece or accessory or even part of the
machine tool itself breaks, parts can be flung off
at high speeds.
■ Always wear impact-resistant eye protection
when operating the abrasive grinding machine.
The degree of necessary protection must be
evaluated separately for each individual task.
■ Ensure that the workpiece has been securely
fixed in place.
■ Ensure that the abrasive medium is securely
clamped to the grinding machine.
GB │ IE │
17 ■