Introduction; Intended Use - Parkside PDTS 6.3 B3 Originalbetriebsanleitung

AIR CUT OFF TOOL
PDTS 6.3 B3

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all of the operating and
safety instructions. Use the product only as described
and for the range of applications specified. Please
also pass these operating instructions on to any
future owner.

Intended use

The compressed air tool is designed for cutting
thin metal sheets without the use of water. Any
other uses of or modifications to the appliance are
deemed to be improper usage and may result in
serious physical injury.
Not for commercial use.
Explanation of the symbols used:
WARNING!
Read the operating instructions
before use.
Wear protective goggles!
Direction of rotation
Oil daily!
11/2019 Date of manufacture
Expiration date
11/2021
(visible on the inner metal ring)
Before using the device for the first
time, read the original operating
instructions and safety instructions.
Wear ear muffs!
│ GB │ IE
■ 16
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not designed for wet grinding
Using damaged cutting or roughing
discs is dangerous and may cause
serious injury!
Suitable for grinding metal
Diameter of the disc
75
Not approved for side grinding
Air Cut Off Tool
PDTS 6.3 B3