Installation; Mounting The Sensor; Connection; Connecting The Sensor To A Ak9 Cable - Mettler Toledo InPro 6850i Bedienungsanleitung

InPro 6850i / 6900i / 6950i O
4

Installation

4.1

Mounting the sensor

Important! Remove the protection cap before mount-
ing the sensor.
Mounting the sensor in a housing
Please refer to the instruction manual of your housing
explaining on how to mount the sensor in place.
Mounting the sensor directly on a pipe or a vessel
The 12 mm sensors can be mounted directly through
a socket with inside thread Pg 13.5 and securely
tightened via the Pg 13.5 threaded sleeve.
4.2

Connection

4.2.1 Connecting the sensor to a AK9 cable

The sensor is connected to the transmitter via a AK9
cable. The AK9 cable ensures a secure connection
between the transmitter and the sensor under harsh
industrial conditions. The robust watertight IP 68 con-
nector housing guarantees maximum process safety.
Do not touch the sensor at the AK9 connector plug!
Tightly screw the plug to fasten the two parts.
© 02 / 09 Mettler-Toledo AG
Printed in Switzerland
Sensor 12 / 25 mm
2
AK9 Cable for
Standard Use
Plug
AK9 Connector
InPro 6850i, 6900i, 6950i
15
52 206 349