Cocraft PRO RG500-S Original Bedienungsanleitung Seite 9

48. Display
49. Laser receiver mounting bracket
50. Battery cover
Batteries
Main unit
You can use the included battery pack (8) or insert regular batteries into the included
battery holder (7).
Battery pack
1. Insert the battery pack into the laser
level making sure that the contacts
line up correctly (the battery pack
only fits on in one way).
2. Tighten the lock nut (16).
3. Fully charge the battery before
using the laser level for the first time.
Charging time: approximately
7 hours.
4. Connect the charger to a wall
socket and to one of the power
input sockets (14) or (18) on
the laser level.
5. The LED indicator shines red when
the battery is being charged and
changes to green when the battery
is fully charged.
48
49
50
9