Cocraft PRO RG500-S Original Bedienungsanleitung Seite 12

Modes
Automatic or manual levelling
When it is switched on the laser level automatically enters automatic levelling mode.
Press [ ] (21) so that the green LED comes on to put the laser level into manual
levelling mode. This allows you orientate the laser level at different angles, such as on
slopes.
Line projection
Press [ ] (26) repeatedly to select the beam spread angle. Choose between 10, 45,
90 and 180°.
Changing the rotation speed
Press [ ] (27) repeatedly to limit the rotation speed of the laser. Choose between
0, 60, 120, 300 and 600 rpm.
Out of level warning
The Out of Level Warning feature is automatically deactivated when the level is
switched on.
A deactivated out of level warning feature means that:
• The laser level is more tolerant of knocks than when the feature is activated.
• The laser level switches off if it is moved out of position or subjected to a heavy
blow or jolt.
• The laser level automatically switches itself back on after having been knocked out
of level by a heavy shock.
This feature can be used when you work relatively close to the instrument and are able
to notice that it has been knocked out of line.
An activated out of level warning feature (press [
the button blinks to activate the feature) means that:
• The laser level is less tolerant of knocks than when the feature is deactivated.
• The laser level switches off if moved out of position or subjected to a blow or jolt.
• The laser level will not automatically switch itself back on after having been
knocked out of level by a blow or jolt.
• The LED on the button will flash quickly to indicate this.
This feature is useful for when you are working relatively far away from the instrument
and need to be alerted if it has been knocked out of position.
Note: The Manual Levelling and Out of Level features cannot both be used at
the same time.
] (28) so that the LED on
12