Cocraft PRO RG500-S Original Bedienungsanleitung Seite 8

Remote control
29. [ ] [ ] Manual levelling of the Y-axis
30. [ ◄ ] Laser beam rotates to the left
31. [ ] Rotation speed 0–60–120–300–600 rpm
32. [ ] Select automatic or manual levelling
33. LED indicator
34. [ ] Line, select fan angle 10, 45, 90 or, 180°
35. [ ► ] Laser beam rotates to the right
36. [ ] [ ] Manual levelling of the X-axis
Laser receiver
37. [ ] Power button
38. [ ] Audible signal on/off
39. Battery charge status
40. Audible signal on/off
41. The laser line is inside the sensor
window but above the zero line.
The receiver emits a short audible signal.
42. The laser line is on the zero line.
The receiver emits a continuous audible
signal.
43. The laser line is inside the sensor
window but below the zero line.
The receiver emits a slow audible signal.
44. High sensitivity
45. Low sensitivity
46. Sensor window
47. [ ] High/Low sensitivity. Long-press to
illuminate the display. Long-press again
to switch the display off.
31
30
36
44
43
41
39
37
8
33
32 34
29 35
36
29
46
45
42
40
38 47