Cocraft PRO RG500-S Original Bedienungsanleitung Seite 7

Control panel
23
24
22
21
20. [ ] On/off
21. [ ] Select automatic or manual levelling
22. [ ► ] Moves the laser beam clockwise when you have limited the scanning angle to
10, 45, 90 or 180°
23. [ ► ] Moves the laser beam anticlockwise when you have limited the scanning
angle to 10, 45, 90 or 180°
24. [ ] [ ] Manual levelling of the X-axis
25. [ ] [ ] Manual levelling of the Y-axis
26. [ ] Line, select fan angle 0–10, 0–45, 0–90 or, 0–180°
27. [ ] Select rotation speed 0–60–120–300–600 rpm
28. [ ] Out of level warning on/off
Most of the functions listed above can also be found on the remote controller.
25
24
25
20
7
26
27
28