Care, Maintenance And Storage; Troubleshooting Guide - Cocraft PRO RG500-S Original Bedienungsanleitung

Care, maintenance and storage

• Clean the laser level using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• If the laser level is not to be used for a long time:
- Remove the batteries.
- Store the instrument where it is not exposed to vibrations and is out of reach of
children.
- Ensure that the place of storage has a normal room temperature and is dry and
dust free.
- Charge the battery pack at regular intervals to maintain the battery capacity.

Troubleshooting guide

The laser will
If you are using the battery pack
not switch on.
Make sure that the batteries are charged and correctly fitted.
Refer to the Batteries section above.
If you are using loose batteries in the battery holder
Check the capacity of the batteries and make sure that they are
inserted correctly. Refer to the markings on the battery holder to
ensure correct polarity.
The laser The laser is inclined too much (over 5°). Right the laser level.
switches on
but does not
start, self-
levelling fails.
The laser line is •
not clear. •
•
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner.
When recycling your product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Check the batteries and replace if necessary.
Check the laser window, clean it with a soft cloth if necessary.
Ambient light level too high.
15