Cocraft PRO RG500-S Original Bedienungsanleitung Seite 11

Operating instructions
The laser can be placed/mounted
horizontally or vertically and when
in the horizontal position projects
a horizontal laser line plus plumb dots
upwards and downwards.
The laser level is self-levelling up to 5°.
Note: If the temperature where the laser level is stored differs greatly from
the temperature at which the level is to be used, the level should be allowed to
acclimatise to the ambient temperature before it is used.
Self-levelling
1. The self-levelling feature is automatically activated when the level is switched on.
For the levelling function, one laser dot is aimed to the side and one upwards.
When the laser level has levelled itself the laser will begin to rotate.
2. If the laser level leans more than ±5° it will not start to rotate. If this happens, switch
the laser level off, level it as best you can by hand and then switch it back on again.
In the vertical position it projects a vertical
laser line plus horizontal laser dots.
11