3M PELTOR WS ALERT XP Anleitung Seite 12

Bluetooth Multipoint Technology **
®
This headset supports Bluetooth
Bluetooth Multipoint technology to connect your headset to
®
two Bluetooth devices at the same time. Depending on the
®
type of Bluetooth devices connected and their current
®
activities, the headset controls the Bluetooth
different ways.The headset prioritizes and coordinates
activities from the connected Bluetooth
Pairing a Bluetooth device (fig. 2, fig. 5)
®
The first time the headset is powered on, it automatically
enters pairing mode. A voice message confirms, "Bluetooth
pairing on". Pairing mode can also be entered from the menu.
This is necessary for pairing a second device (fig. 6).
See Configuring your headset.
Make sure that Bluetooth communication is activated on
®
device. Search and select "WS ALERT XP"
your Bluetooth
®
or "WS ALERT XPI" on your Bluetooth
message confirms when the pairing is complete,
"Pairing complete" and "Connected".
NOTE: You can always stop the pairing process by long
press (2 s) the Bluetooth button [
®
NOTE: Only one of the two paired devices can be a two-way
radio. ** The headset only supports two-way radio with 3M™
PELTOR™ Push-to-talk protocol. Any questions, please
contact your local distributor.
NOTE: When a 3rd Bluetooth
paired, one of the previous paired devices is removed
from the headset. If one of the devices is connected, the
unconnected device is removed. Otherwise, the 1st paired
device is removed. **
RECONNECTING BLUETOOTH
When the headset is powered on, it tries to reconnect
to all paired devices during 5 minutes. A voice message
will confirm the connection "Connected".
NOTE: If the link is lost, the headset will try to reconnect
during 30 seconds. A voice message will inform you if you
get link loss,
"Disconnect".
Connected and operating one phone.
Connected and operating two phones. ** (see fig. 7)
Bluetooth
®
State
button
No activity
Streaming
Incoming call
Outgoing call/Call
in progress
Short press
Call in progress
on one phone,
incoming call on
second phone **
Multipoint technology. Use
®
devices in
®
devices.
®
device. A voice
®
] (fig. 7).
device is successfully
®
DEVICES
®
Action
Voice control Play **
Voice control Pause **
Answer
End call
End ongoing call,
answer incoming
call **
** 3M™ PELTOR™ WS™ ALERT™ XPI Headset
No activity/
Streaming
Incoming call
Long press
Call in progress
®
Call in progress
on one phone,
incoming call on
second phone **
Connected to two-way radio.
Connected to two-way radio and phone. **
Operating two-way radio. (see fig. 7).
Bluetooth
®
button
No activity /
Press
Streaming
Transmitting on
Release
Two-way radio
Connected to phone and two-way radio. **
Operating phone. ** (see fig. 7)
Bluetooth
®
button
Incoming call
Outgoing call /
Call in progress
Ongoing reception
on two-way radio
Short press
and incoming call
Ongoing phone
call and reception
on two-way radio
Incoming call
Long press
Call in progress
NOTE: When connected to a two-way radio you cannot
control the audio playback unit from the headset. **
NOTE: If you have an ongoing phone call, you will hear two
beeps for incoming call on the two-way radio. To switch to the
incoming two-way radio call, short press (1 s) the the
Bluetooth button [
®
Call the last dialed
number
Voice control on the
last paired device **
Reject
Toggle call between
phone/headset
Reject incoming call
State Action
Start transmitting on
two-way radio
Stop transmitting on
two-way radio
State Action
Answer
End call
Answer
End call
Reject
Toggle call between
phone/headset
] to end the call. Short press (1 s)
GB
4