Print Settings; Label Layout - Carl Valentin Spectra 107/12 Kurzanleitung Und Hinweise Zur Produktsicherheit

Spectra

Print Settings

Keys:
Key:
Key:
Key:
Key:
Key:

Label Layout

Keys: ,
Key:
Key:
Key:
Key:
Key:
Key:
88
Speed:
Value range: 50 mm/s ... 300 mm/s (see the technical data).
Contrast:
Value range: 10 % ... 200 %.
Ribbon control
Examination if the transfer ribbon roll is to end or if the ribbon was torn at the unwinding roll.
Off: The ribbon control is deselected, i.e. the printer continues without an error message.
On, weak sensibility: The current print order is interrupted and an error message appears at
the printer display. The printer reacts at approx. 1/3 more slowly to the end of the transfer
ribbon (default).
On, strong sensibility: The current print order is interrupted and an error message appears at
the printer display. The printer reacts immediately to the end of the transfer ribbon.
Y displacement:
Indication of initial point displacement in mm. The label is moved vertically.
Value range: −30.0 ... +90.0.
X displacement:
Indication of displacement in X direction. The fields on the label are moved.
Value range: −90.0 ... +90.0.
Tear off:
The standard value of tear off offset is 12 mm.
Value range: 0 ... 50.0 mm.
Label:
Minimum height: 5 mm (dispenser mode: 25 mm).
Gap:
Minimum value: 1 mm.
Column printing:
Indication of width of one label as well as how many labels are placed side by side.
Measure label:
Press key to start measuring
Type of label:
Generally adhesive labels are set. In case you would like to use continuous labels, you have to
select this in the menu.
Material:
Selection of the used print materials.
Photocell:
Selection of the used photocell.
Scan position (AP):
Entry of percental label length by that the label end is searched. Marks onto the label can be
skipped.
English