Operation Procedure; Presentation Using Printed Materials, Etc - Elmo L-1ex Bedienungsanleitung

4

OPERATION PROCEDURE

Presentation using printed materials, etc.

n Setting the main unit
Set the main unit as shown in the figure above. Then connect it to a projector or a PC
monitor, and turn on the power for the main unit.
n Adjusting the size
Place an object on the stage, and then adjust the zoom dial on the main unit or the zoom
buttons [
size.
P.117
n Adjusting the focus
Press the [AF] button on the main unit or on the remote control to focus the camera on the
object.
P.118
n Adjusting the brightness
Press the [BRIGHTNESS
the remote control to adjust the image brightness.
n Turning the illumination lamp ON/OFF
Move the illumination lamp switch on the main unit to the left/right to turn it ON/OFF.
N o t e
• Before connecting the main unit to other devices, be sure to turn off the power for all
of the devices.
• When copying B&W characters or documents etc., use TEXT1 to 3 from the OSD
(Camera image) as the image mode.
A better image may be produced by selecting Graphics1 mode with DLP projector.
• When connected to a DLP projector, select the image mode according to the
displayed image as both text and photos can be beautifully reproduced by switching
to Graphics2 mode.
102
English
] on the remote control so that the part you want to shoot fits the screen
/
]/[BRIGHTNESS ] buttons on the operating panel or on
P.121