Olympus CAMEDIA C-21 Bedienungsanleitung Seite 240

240
E
When the camera is connected to a computer,
an error message appears while data is being
transferred to the computer.
The cable is not plugged in correctly.
- Connect the cable correctly. (p. 188)
The power is OFF.
- Open the lens barrier to turn on the power. (p. 50)
The batteries are exhausted.
- Replace the batteries with new ones (p. 40) or use the optional
AC adaptor (p. 42).
The serial port is not selected correctly.
- Use the operating system software to make sure the serial port
is selected correctly.
There is no available serial port.
- Make one available by following the computer's instructions.