Initial Use; Inserting / Replacing Batteries - Silvercrest 322244 Gebrauchsanleitung Und Sicherheitshinweise

Initial use

Verify the parts listed in the scope of delivery are complete.
Remove all packaging material.

Inserting / Replacing batteries

Slide the battery cover off the battery compartment
11
(fig. C).
Insert the four type 1.5 V AAA (Alkaline type LR03)
batteries (with the correct polarity) into the device (fig. C).
Please note the marking inside the battery compartment.
Carefully close the battery cover on the battery com-
partment .
11
Do not use rechargeable batteries.
Note: if the change battery indicator
is displayed
17
continuously, measurement will not be possible until all
batteries have been replaced. As soon as the batteries
have been removed from the device, the date and time
will be reset. Saved measurements will still be stored.
All display elements will be displayed briefly and "24h"
will flash on the display. Configure the date, time and
Bluetooth (see "Configuring date / time / Bluetooth ").
® ®
18 GB/CY