Saving, Requesting And Deleting Measurements - Silvercrest 322244 Gebrauchsanleitung Und Sicherheitshinweise

If the systole and diastole values are in two different ranges
(i.e. systole is "high, normal" and diastole is "normal") the
graphic categorisation on the device will always show the
higher range i.e. in the above example this would be "high,
normal".
Saving, requesting and deleting
measurements
The results of each successful measurement are saved
together with the date and time. If there are over 30 meas-
urement values, the oldest measurement value will be over-
written.
With the device off, press the SET button
function buttons -/+
... . Confirm your choice using the START / STOP
button
Press the memory button M
value "A" of all saved measurements pertaining to the
user memory. Press the memory button M
display the average value of the last 7 days for the
morning measurement. (Morning: 5.00 am – 9.00 am,
display "AM"). Press the memory button M
to display the average value of the last 7 days for the
evening measurement. (Evening: 6 pm – 8 pm, display
"PM"). By pressing the memory button M again, the
last individual measurement will be displayed with the
date and time.
28 GB/CY
to select the desired user memory
7
.
8
6
to display the average
5
5
. Press the
again to
again
5