Automatic Switch-Off Function; Cleaning And Maintenance; Cleaning The Steam Wand; Cleaning The Filter Holder And The Filters - Gaggia Milano CLASSIC RI9480 Bedienungsanleitung

AUTOMATIC SWITCH-OFF FUNCTION

The machine is equipped with an energy saving func-
tion. After 20 minutes of inactivity, the machine turns off
automatically. To reactivate it, press the on/off button.

CLEANING AND MAINTENANCE

Regular cleaning and maintenance keep the machine in
perfect conditions and ensure perfect coffee flavour, a
constant coffee flow and excellent milk froth for a long
period of time.

Cleaning the steam wand

After each milk frothing:
1. Clean the steam wand with a damp cloth. To clean it
more thoroughly, you can unscrew the nozzle (Fig.13)
and wash it with running water.
2. Open the steam knob, allowing the steam to escape for
one or two seconds to clear the nozzle hole (Fig.1-23).

Cleaning the filter holder and the filters

The filters should be kept clean to guarantee perfect
results.
Warning! The filter must only be replaced when the
filter holder cup has cooled down completely to avoid
burns.
Every day, remove the filter from the filter holder as de-
scribed in (Fig.14) and wash it with warm water.
If you notice a malfunction when
brewing coffee, immerse the filters
in boiling water for 10 minutes and
then rinse them with running water.
To clean the filters more thoroughly,
we recommend using the GAG-
GIA cleaning tablets specifically
designed to keep your machine in
perfect working order.
4219-465-02441 MANUAL GAG. CLASSIC-2019 RI9480 EU V_3.indd 17

Cleaning the grill and drip tray

Remove the drip tray and the grill (Fig.1-10,11) and wash
them with water. Do not use abrasive cleaning tools.

Cleaning the water tank

Warning! To avoid burns, the tank should be cleaned
only when the machine is turned off. The drain hose
(Fig. 11) may reach high temperatures during operation.
Remove the water tank (Fig.1-13) and wash it with fresh
water.
To remove the water tank, first remove the drip tray (Fig
1-11), and then remove the drain pipe (Fig.11) by pulling
it downwards.
Note.
When reinserting the tank, make sure that the silicone
tubes are inside the tank and that they are neither twisted
nor blocked (Fig.12).

Cleaning the screen

Regularly remove any residual coffee grounds from the
screen (Fig.16) using a brush and wash with hot water
following the instructions given in the section "How to
lower the temperature".

Cleaning after a long period of inactivity

When the machine is not used for a long time (more than
two weeks), follow the instructions given in the section
"When using for the first time or after a period of inactivity
of more than 2 weeks".
• 17 •
ENGLISH
31/01/2020 12:43:02