Cleaning; Troubleshooting - Silvercrest SHH 1200 A1 Bedienungsanleitung

BB&3(B%ERRN 6HLWH  0LWWZRFK  -XQL    

7. Cleaning

In order to enjoy your device for a long time,
you should regularly clean it.
DANGER! Risk of electric
shock!
~ Disconnect the mains plug before any
cleaning.
DANGER! Risk of injury
through burning!
~ Allow the device to cool down.
WARNING! Risk of material damage!
~ Under no circumstances remove the pro-
tective grid.
~ Do not use any astringent or abrasive
cleaning agents.
1. Carefully remove larger dust deposits
from the protective grid|9 using a vacu-
um cleaner.
2. Remove the residue with a soft brush.
Ensure that no dust falls into the interior
of the device. Therefore, hold the device
in such a way that the protective grid|9
shows downwards.
3. Clean the outside of the device with a
damp cloth. You can also use some de-
tergent.
4. Use a cloth dampened in clear water
for wiping afterwards.
5. Do not use the device until it is com-
pletely dry again.

8. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~ Do not attempt to repair the device your-
self under any circumstances.
Possible causes /
Fault
• Fuse or wall socket
faulty? Choose a dif-
ferent wall socket.
• Defective device? Take
it to a specialist work-
The device can-
shop for repair, or dis-
not be
pose of the device.
switched on.
• Is the base completely
standing on the floor
such that the safety
switch is pressed in-
wards?
• Electronic component
The device can- faulty? Take it to a spe-
not be cialist workshop for re-
switched off. pair, or dispose of the
device.
• Safety switch has trig-
gered: put the device
into its upright position
(see "Safety switch"
Device on page 44)
switches off • Overheating protec-
automatically. tion has triggered: let
device cool down and
then clean it (see
"Overheating protec-
tion" on page 44)
Action
45
GB