Frost Protection Function; Cleaning; Transport And Storage - Silvercrest SKD 2300 D5 Bedienungsanleitung

Frost protection function

The appliance has a frost protection function that prevents the room temperature from
falling below the frost line.
♦ Press the button for selecting the heat setting
„Frost protection" symbol
NOTE
► As soon as the temperature in the immediate vicinity of the appliance
falls under 5 °C (41 °F) the appliance will switch on automatically.
► As soon as the temperature climbs above 9 °C (48 °F), the appliance switches
itself off and the room temperature will be shown on the display
♦ To switch off the frost protection function, press the button for selecting the heat set-
24
ting
from the display

Cleaning

WARNING
► Always pull out the plug before cleaning the appliance.
► Allow the appliance to cool down before cleaning to prevent any risk of burns.
► Only clean the appliance when it is switched off and cold.
CAUTION
Moisture can cause damage to the appliance.
► To avoid irreparable damage to the appliance, ensure that no moisture gets
into it during cleaning.
► Never immerse the appliance in water and protect it from splashing or sprayed
water.
■ Clean the housing only with a soft damp cloth and a mild detergent.
■ Remove dust deposits on the protective screen with a vacuum cleaner.

Transport and storage

■ Always carry the appliance using its carrying handles
■ Disconnect the power plug and remove the battery from the remote control
if you will not be using the appliance for a long time.
■ Store the appliance in a dry environment.
│ GB │ IE │ NI │ CY
■ 14
12
appears on the display
26
or repeatedly until the „Frost protection" symbol
2 .
24 26
or repeatedly until the
2
.
2
.
12
disappears
9
.
SKD 2300 D5
25