Starting Operation; Programming The Quantity - Quick MILL 07000 Michelangelo Bedienungsanleitung

Mod. 07000
2. CONTENTS
2.1. Use and Maintenance Manual
2.2. Brush for cleaning
2.3. Measure for ground coffee

3. STARTING OPERATION

3.1. Remove the machine from its packaging.
3.2. Position the machine on a stable, robust and secure surface.
3.3. Make sure you have correctly inserted the bean container A and grounds container G.
3.4. Extract the water tank F, clean it carefully and fill it, then put it back in the machine.
3.5. Insert the drip tray D.
3.6. Connect the plug to a socket with rated voltage equal to that shown on the machine data plate.
3.7. Turn on the machine by pressing key 9.
4. ALARM SIGNALS
4.1. These signals are visible on display P, the description of the type of alarm which appears on the display is combined with an acoustic signal.
4.2. The machine stops when an alarm message is displayed and it is not possible to dispense anything.
4.3. After resetting the machine for correct operation, press key 9 to reset, the alarm message will reset automatically.
For example: the bean container is missing, by inserting the container and closing its shutter the alarm disappears automatically.
4.4. Details of alarm signals
4.4.1. Refill water tank! - extract the tank, fill it and put it back in the machine, then press key 9
4.4.2. Coffee bean container missing! - insert the coffee bean container and open the shutter
4.4.3. Door open! - close the front door
4.4.4. Grounds missing! - insert the grounds container
5. USE INSTRUCTIONS
5.1. Coffee brewing: the machine has three keys used to brew coffee (keys 1, 2 and 3), the quantity of brewed coffee can be programmed differen-
tly for each coffee brewing key.
5.1.1. Strong coffee: press key 1 to brew a single coffee, press twice quickly to automatically brew two coffees (the machine performs two cycles)
5.1.2. Long coffee: press key 2 to brew a single coffee, press twice quickly to automatically brew two coffees (the machine performs two cycles)
5.1.3. Extra long coffee: press key 3 to brew a single coffee, press twice quickly to automatically brew two coffees (the machine performs two cycles)
5.1.4. Ground coffee: used to brew coffee using instant coffee Open the ground coffee door C, add the coffee with the supplied measure and then
press key 7 and then the key for the desired type of coffee (for example if you want strong coffee press key 7 and then key 1)
5.1.5. Extra coffee: used to brew coffee with a longer warm-up in order to obtain a more consistent brewing. Press key 4 and then the key for the
desired type of coffee (for example if you want strong coffee press key 4 and then key 1)
5.2. Hot water dispenser: the machine is equipped with a key used to dispense hot water key 5, the quantity of water is programmable.
5.3. Steam dispenser: the machine is equipped with a key used to dispense steam key 6, the quantity of water is programmable, by pressing the
key twice in a row the steam is dispensed in continuation, to stop dispensing, press the same key again.

6. PROGRAMMING THE QUANTITY

6.1. Programming the quantity of coffee (by volume): press down and keep pressed the key you want to program, once you reach the desired quan-
tity release the key. The machine will memorise the desired quantity.
6.2. Programming the quantity of hot water (by volume): press down and keep pressed the key you want to program, once you reach the desired
quantity release the key. The machine will memorise the desired quantity.
6.3. Programming the quantity of steam (by time): press down and keep pressed the key you want to program, once you reach the desired time
release the key. The machine will memorise the desired time.
7. PROGRAMMAZIONE DEL MENÙ
7.1. Press key 8 to enter the menu. To browse the menu press keys 1 or 2. To access a submenu press key 8. To change a value press keys 1
or 2 then press key 8 to confirm the change or press key 7 to cancel the change.
QUICK MILL
14