Description Of Components; Filling The Water Tank; Starting The Machine - Quick MILL 06004 Bedienungsanleitung

4 DESCRIPTION OF COMPONENTS

1 – main switch (applied on the rear part)
2 – water stem service switch (applied on the rear part)
3 – General machine ON light
4 – Coffee heating element on light (machine ready with light off)
5 – Water/steam heating element on light (machine ready with light off)
6 - Coffee brewing switch
7 – Steam dispensing switch
8 – Hot water dispensing switch
9 – Pump pressure gauge
10 – Water tank
11 – Steam wand
12 – Air mixer
13 – Cup tray
14 – Cup heater cover with frame
15 – Filter holder
5. INSTALLATION
5.1 PACKAGING
After removing the original packaging, it advisable to save it in case the machine needs to
be moved. The original packaging serves only to protect the machine during transport.
5.2 CONNECTION TO THE MAINS
Before connecting the machine cord to a socket make sure the main switch is on ÏOÓ.
Scrupulously follow the instructions in Chap. 3 for your safety and the
safety of others.

5.3 FILLING THE WATER TANK

Remove the water tank 10 and carefully clean it, fill it with fresh water up to two
centimetres from the top, put it back in its seat so that the suction and return tube are
inside the tank.
Use non-sparkling drinking water, other liquids can damage the tank. Do not start
the machine without having filled the water tank 10

5.4 STARTING THE MACHINE

Before starting the machine for the first time or after a long period of no use, follow the
instructions below:
Mod 03004 - Mod. 06004
6. Press the start button 1 equipped with light
7. Press the start button 2 to turn on the water steam services
8. The illuminated buttons 4-5 indicate that the machine is in the warm-up phase, wait