Operation In Bluetooth Mode - Imperial DABMAN BT 40 Bedienungsanleitung

7. OPERATION
4. The volume can now be adjusted directly on your radio. All
other functions such as play/pause, title forward or back
must be set at your audio source.
Notes:
If you are connected via the Line Out output of your audio source, it
E
is sufficient to adjust the volume only on your dABMAN. If you are
connected via the headphone output of your audio source, it may be
necessary to adjust the volume on both devices in order to achieve
the desired level.

7.6 OPERATION IN BLUETOOTH MODE

Bluetooth provides the facility to transmit audio files by wireless
means and over a short distance to your dABMAN BT40, and to
play them there. devices using the Bluetooth standard transmit
data in the ISM band at a frequency of 2.402 to 2.480 gHz. In this
frequency band, it is quite possible that problems may occur through
the simultaneous operation of wi-fi networks, other digital radios,
mobile telephones or microwave devices operating on the same
frequency.
Our product gives you the facility of receiving audio files from
a Bluetooth-enabled reproducing device and to play them. The
functional radius using Bluetooth 2.1 is limited to approx.10m, and
depends on other radio waves present in the direct environment.
In view of the very large number of reproducing devices from various
manufacturers, many of them using significantly different software
versions, we cannot unfortunately guarantee compatibility.
Operating Manual 62