Imperial DABMAN BT 40 Bedienungsanleitung Seite 68

7. OPERATION
Alarm options:
Time selection – hours and minutes
Alarm mode – once |daily |weekend | workdays,
The alarm is active on these days, and will wake you at the desired
time.
E
Alarm type (source) – dAB+ | uKW/fM | buzzer note 1 | buzzer
note 2.
Please note:
The options dAB+ or fM/uKW can only be selected when you are
in this operating mode. As described above, selection is made via the
function key.
Setting Alarm time 2
1. While in dAB+/uKW/fM/AuX-IN mode press the
ALARM/SNOOZE key twice briefly. "Alarm2 time set" will
be shown on the display.
2. To disable the alarm, please proceed exactly as described
in the previous point.
As soon as the alarm time has been reached, the buzzer note will
sound, initially at low volume, and then gradually at an increasing
volume.
during the alarm, the bell symbol on the display will flash.
To end the alarm, press the /ENTER key, the product will
immediately switch to standby mode.
Operating Manual 68