Imperial DABMAN BT 40 Bedienungsanleitung Seite 54

7. OPERATION
E
3. As soon as the scan is completed, the time of the station
signal (if available) will be displayed, and the first station in
the station list will be played.
4. Press the "<" or ">" key to page through the station list. To
select a station, please press the ENTER key. The display
will now show the new station with all details.
5. If no stations were found during the scan, the display will
show "No dAB station".
Comments:
As is the case with digital terrestrial television, it is very difficult to
receive a good dAB+ signal in some regions. Network providers will
be working to provide improved coverage in future.
In individual cases it may be necessary to wait a while in order to re-
ceive all dAB+ stations. You can obtain information on the availability
in your region online at www.digitalradio.de or at appropriate sites in
your country.
It may occasionally be necessary to start a manual scan. This may
have the following reasons:
- New stations have been added or are now available.
- Stations have been switched off or can no longer be received. (In the
station list, invalid stations are marked with a question mark before
the station name).
If reception was not adequate during the initial station scan (e.g. an-
tenna not fully extended), not all stations could be found, and the stati-
on list will be incomplete or faulty.
Operating Manual 54