Product Overview; Feature Description; Intended Use; Limitations On Use - Dräger Panorama Nova ESA Gebrauchsanweisung

2 Description
2.1

Product overview

6
5
4
3
2
1
12
11
1 Connector
2 Control valve
3 Inner mask
4 Visor
5 Visor frame
6 Upper head-harness
connector
14
7
8
9
10
7 Harness
8 Face seal
9 Carrying strap
10 Mask body
11 Clamping ring
12 Exhalation valve cover
(approved by Dekra Exam)
2.2

Feature description

The full face masks have a universal plug-in connector compliant with
DIN 58600. This makes the full face masks suitable for overpressure
self-contained breathing apparatuses and overpressure airline
equipment. DIN 58600-compliant full face masks and lung demand
valves marked as "ESA" can be combined with each other.
The full face mask additionally has an Rd40x1/7" thread compliant with
EN 148-1. Respiratory filters can be connected via this thread. In this
case, however, the exhalation resistances will not comply with EN 136.
The full face masks can be used at temperatures from –30 °C to
+60 °C.
Mask spectacles can be inserted for users who wear spectacles.
2.3

Intended use

The full face masks protect the face and eyes against aggressive
media.
2.4

Limitations on use

WARNING
!
Beards and sideburns in the sealing area of the full face mask
will cause leakages! Therefore the full face mask should not
be used by anyone with facial hair of this sort. Earpieces in
the sealing area also cause leakages. Use special mask
spectacles.
When used with a respiratory filter, the full face mask may only be used
for post-fire care. The exhalation valve has been designed for use with
an overpressure self-contained
overpressure airline equipment. Due to this, the exhalation resistance
is greater than with normal masks. Normal-pressure SCBAs or normal-
pressure airline equipment must not be connected to this thread.
breathing apparatuses or
Panorama Nova ESA