Switching Inserter Mode On / Off - FP PostBase Anleitung

10
PostBase mailing system with inserter link
5

Switching Inserter Mode on / off

In Inserter Mode, the PostBase mailing system operates with a higher letter transport
run-on time. The interval in which the print system automatically cleans itself is also
higher, allowing for a smooth operation.
As a standard practice, the Inserter Mode stays switched on.
• Open the M .
ENU
• Choose I
NSERTER
PostBase opens the adjustment menu for the
Inserter Mode. The current setting is shown
on a dark background.
• Select the desired setting.
• S the setting shown.
AVE
The setting will remain active until you
change it again, even after switching the
PostBase off.
M .
ODE