Safety Tips - FP PostBase Anleitung

4
PostBase mailing system with inserter link
1

Safety tips

The PostBase with inserter link is intended for inserting and franking mail. The Post-
Base mailing system with inserter link complies with the pertinent safety regulations
for office information equipment.
Please observe the following tips for your own safety.
• Installation and commissioning of the PostBase with inserter link have to be done
by qualified personnel authorised by Francotyp-Postalia.
• Only perform tasks with the PostBase with inserter link that you were trained for.
• Operate the PostBase with inserter link only on grounded single-phase power
sockets. Make sure your office power supply conforms to the power requirements
indicated on the serial number plates.
• Do not remove any equipment related to safety or protection. Do not make them
inoperative or unable to function. Do not remove any parts of the housing.
• Please pay attention to the safety signs on the inserting system and mailing sys-
tem. Danger areas are marked with safety signs.
• Keep long hair, fingers, loose clothing pieces, ties, shawls, jewelry and the like
away from moving machine parts.
• Pull the power plugs prior to cleaning the inserting and mailing system.
• Have maintenance and repair work done only by qualified personnel authorised by
Francotyp-Postalia. Otherwise, your warranty may become void.
• If you wish to reinstall the system on a new location, please contact the service.
• Read the supplied operator manuals (see page 2). Read these manuals for infor-
mation on safe handling the respective modules.