Technical Data; Safety Information; Symbols - Parkside PSSA 3.6 D4 Originalbetriebsanleitung

Technical data

Cordless screwdriver ... PSSA 3.6 D4
Motor voltage ................ 3.6 V
Rated speed (n ) .......................200 min
0
Torque .................................. max. 5 Nm
Protection class ..............................
Weight (without charger) ............. 0.43 kg
Sound pressure level (L
................................................ K= 3 dB
Sound power level (L
................................................ K= 3 dB
Vibration (a ) while
h
tightening a screw .. < 2,5 m/s
battery (Li-Ion)
Battery cells ...................................... 1
Nominal voltage ......................3.6 V
Capacity .................................. 1.5 Ah
Charging time ................... approx. 1 h
Charger .......... WJG-Y080501500W
Nominal consumption .................. 16 W
Voltage input .....100-240 V~, 50-60 Hz
Voltage Output ..........5 V
Protection class .............................
Protection category ...................... IPX0
The noise and vibration levels have been
calculated according to the norms stated in
the conformity statement.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.Safety
; 1.5 Ah
III
) ........ 55.4 dB(A)
pA
) ......... 66.4 dB(A)
WA
, K= 1,5 m/s
2
; 1500 mA
precautions aimed at protecting the
user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cy-
cle are to be considered, including,
-1
for example, times during which the
III power tool is turned off and times
when the tool is turned on but is
running idle).

Safety information

When using the device, please observe the
safety instructions.
2

Symbols

Symbols in the manual
Warning symbols (instead of
the exclamation mark, the
danger may be explained)
with information on damage
and injury prevention.
II
Instruction symbols (the instruction
may be explained at the place of
the exclamation mark) with informa-
tion on preventing damage.
Wear ear protection.
Help symbols with information on
improving tool handling.
Symbols on the unit
Before using for the first time, care-
fully read through the user manual.
Do not dispose of the device
with the battery installed in
household waste.
GB MT
45