Parkside PSSA 3.6 D4 Originalbetriebsanleitung Seite 48

GB MT
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
h) Hold the device by the insulated
gripping surfaces when per-
forming work in which the cut-
ting tool may come into contact
with hidden wiring or its own
cord. Contact with a live wire can also
cause a charge in metal parts of the
device and result in an electric shock.
5) CArEFUL HAnDLInG AnD USE
oF bATTErY DEVICES
a) Charge the batteries only in
chargers that are recommended
by the manufacturer. Risk of fire if a
charger that is suitable for a specific type
of battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries may
result in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into
eyes, seek medical assistance.
Leaking battery fluid may cause skin
irritations or burns.
48
6) SErVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
7) SPECIFIC SAFETY InSTrUCTIonS
For PoWEr SCrEWDrIVErS:
a) Hold the appliance by the in-
sulated handle grips when
performing work in which the
screw may come into contact
with hidden wiring or its own
power cord. If the screw were to
come into contact with a live electrical
cable, metal parts of the appliance
could also become live and cause an
electric shock.
8) SPECIAL SAFETY DIrECTIonS
For bATTErY-oPErATED TooLS
a) Do not subject the battery to
strong sunlight over long pe-
riods and do not leave it on a
heater. Heat damages the battery
and there is a risk of explosion.
b) Allow a hot battery to cool be-
fore charging.
c) Do not open up the battery and
avoid mechanical damage to
the battery. Risk of short circuit and
fumes may be emitted that irritate the
respiratory tract. Ensure fresh air and
seek medical assistance in the event of
discomfort.