Starting The Generator; Stopping The Generator - Dometic TEC40D Bedienungsanleitung

Operating the generator
8.2 Switching the generator to standby or no function
The generator can be switched to standby or no function with the main switch
(fig. 2 1, page 3) in the connection box.
8.3 Switching the control panel on and off
This switch on the control panel (fig. 3 2, page 4) is for switching the control
panel on and off.
➤ Switch the control panel on with the on/off switch.
✓ The display shows:
The display switches off automatically after 5 minutes if the start button is
not touched within this time.
Press the start button to switch on the display again.
✓ The generator can now be started.
8.4

Starting the generator

The generator can only be started if it is in standby and the control panel is
switched on.
I
NOTE
If the generator is still warm, press the start button briefly to start
it; press longer for a cold generator.
➤ Start up the generator with the green button "START/STOP (fig. 3 3,
page 4).
8.5

Stopping the generator

➤ Stop the generator with the on/off switch (fig. 3 2, page 3).
If the generator does not stop: switch it off with the main switch (fig. 2 1,
page 3).
16
.
GEN OFF
TEC40D
EN