Dometic TEC40D Bedienungsanleitung Seite 14

Technical description
Control elements in the remote control
The remote control is installed in the vehicle interior.
No. in
fig. 3, Description
page 4
1 Display
2 On/Off switch P
3 Green button
START/STOP
4 Fuel gauge
5 Oil gauge
Displays
No. in
fig. 3, Description
page 4
6 AC supply
7 Constant output
8 Operating hours
9 DC voltage
10 Messages
14
Shows the status reports.
Switches the control panel on and off if
the main switch is at "I" or "1".
Stops the generator in emergency.
Starts/stops the generator if the control
panel is switched on and the main switch
is at "I" or "1".
Lights up if the diesel fuel goes into
reserve.
Lights up if the oil level is too low in the
engine.
Actual voltage output
Current capacity of connected consumer
Time the generator is in operation
Battery voltage
Status reports of the generator (see
chapter "Display messages" on page 17)
TEC40D
EN