Herunterladen Diese Seite drucken

CYBEX SOLUTION Z i-FIX Handbuch Seite 27

Werbung

• Push the two ISOFIX locking arms (8) into the ISOFIX
anchorage points (6) until these lock into place with an
audible "CLICK."
• Ensure that the car seat is secure by trying to pull it out.
• The green safety indicator (10) must now be clearly visible
on the two release buttons (9).
• Use the ISOFIX adjustment handle (7) and push the car
seat against the vehicle seat.
• Always ensure that the entire surface of the backrest of
the car seat is placed fully against the backrest of the
vehicle seat.
REMOVING THE CAR SEAT FROM THE VEHICLE
Perform the installation steps in the reverse order.
• Unlock the ISOFIX locking arms on both sides by pushing
the release buttons and pulling them back simultaneously.
• Pull the car seat out of the ISOFIX anchorage points.
• Rotate the ISOFIX locking arms 180°.
• Operate the adjustment button of the car seat and push the
connectors in as far as they will go.
NOTE! By folding in the ISOFIX locking arms, you are not just
protecting the vehicle seat but also the ISOFIX locking arms
of the ISOFIX system from dirt and damage.
• Spingere i due bracci di bloccaggio ISOFIX (8) nei punti di
ancoraggio ISOFIX (6) fino a quando questi si bloccano in
posizione con un "CLIC" udibile.
• Assicurarsi che il seggiolino sia fissato in sicurezza
cercando di estrarlo.
• L'indicatore di sicurezza verde (10) deve essere
chiaramente visibile su entrambi i pulsanti di rilascio (9).
• Utilizzare la maniglia di regolazione ISOFIX (7) e spingere il
seggiolino contro il sedile del veicolo.
• Assicurarsi sempre che l'intera superficie dello schienale del
seggiolino sia posizionata il più possibile a contatto con lo
schienale del sedile del veicolo.
RIMOZIONE DEL SEGGIOLINO DALL'AUTO
Seguire il procedimento per l'installazione nell'ordine inverso.
• Sbloccare i connettori ISOFIX su ambo i lati premendo
i pulsanti di rilascio e contemporaneamente tirandoli
all'indietro.
• Estrarre il seggiolino dai punti di ancoraggio ISOFIX.
• Ruotare di 180° i connettori ISOFIX.
• Azionare il pulsante di regolazione del seggiolino e spingere
completamente all'interno i connettori.
NOTA BENE! Ripiegando i connettori ISOFIX, proteggerete
da possibili danni non solo il sedile dell'auto, ma anche da
danneggiamento e sporcizia i connettori ISOFIX stessi.
27

Werbung

loading